| Type |
Description |
| CANopen interface |
- CANopen interface PSC-CAN
- 14 bit accuracy
- Internal Card available for ES150, ES300, SM800, SM1500, SM3000, SM6000
- See PSC-CAN on this site
 
|
| PROFIBUS interface |
- PROFIBUS interface PSC-PB
- 14 bit accuracy
- Internal Card available for ES150, ES300, SM800, SM1500, SM3000, SM6000
- See PSC-PB on this site
 
|
| SM600-10 |
- 0 - 600V 0 - 10A
- New power supply in the SM6000-series
- Series operation up to 1200V
- Standard Isolated analogue programming and monitoring
- Selectable 0 - 5V or 0 - 10V programming signal levels
- See SM6000-series on this site
|
| PSC-ETH Easy Control |
- Utility to check the PSC-ETH ethernet interface
- A power supply with an Ehternet interface can be operated from the screen
- The output range, scales, indicators etc. of a power supply are adjusted automatically
- This software is included on the driver CD of the PSC-ETH, the CD can also be downloaded form this site, see
software download
|
| PSC-ETH Wave2Sequence |
- Wave2Sequence
- Copy and paste functionality
- Copy a wave form from a digital oscilloscope and paste it into the sequencer of a Delta power supply in just 4 steps: Load, Clean, Upload and Run
- For experienced users the “expert” tab provides more extended possibilities to filter and adjust the signal
- This software is included on the driver CD of the PSC-ETH, the CD can also be downloaded form this site, see
software download
|
| Power Supply Control I |
- Power Supply Control I
- Utility to program a sequence for the PSC-ETH
- The voltage, current, time and ramp of a program step of a sequence can be entered
- This software is included on the driver CD of the PSC-ETH, the CD can also be downloaded form this site, see software download
|
| SM800 - series |
- Successor of the SM700
- New output range 0 - 7.5 Volts; 0 – 80 Ampere
- Size, reduced to half 19 Inch. Assembly kits for 19 Inch rack available
- Increased output power: 600 – 900 Watt
- More features, like Easy
Master/Slave, Output On/Off button, Interlock, Prepared for Power Sink
Option, Wide choice of Interface Options: Ethernet, IEEE488, RS232
- Potmeters optionally replaced by digital encoders
- Output connection on front panel as an option
- Sequencer option, for both waveform generation and stand-alone automation
|
| SM6000 with Power Sink Option |
- Built - in dynamic load to be able to absorb 700W power.
- Ideal voltage source for testing PWM controlled DC motors.
- Speed-up of down programming at low load conditions in ATE equipment.
- For datasheet, see SM6000-series on this site
|
| Second Generation SM1500 - series |
- 2nd Generation SM1500
- More features, like Easy
Master/Slave, Output On/Off button, Interlock, Prepared for Power Sink
Option, Wide choice of Interface Options: Ethernet, IEEE488, RS232
- Two new Autoranging versions: SM52-AR-60
and SM400-AR-8, having double the output voltage and current range
- Power Sink Option
- See SM1500-series
on this site
|
| PSC-ETH, Ethernet
Interface |
- Interface between Ethernet IP Network and Power Supply
- 16-bit accuracy
- Integrated Sequencer, to create
arbitrary waveforms
- See PSC-ETH on
this site
|
| EST150, Triple
Output Power Supply |
- 150W Triple output Power Supply
- 2x 20V / 2.5A, 1x 10V / 5A
- See EST150
on this site.
|
| High Speed Programming
Options for the SM6000 - series |
- The SM6000 is now available with High Speed Programming
Options
- Rise- and fall-times about 10 times faster
- Applications: Laser Diodes, Fast test systems (ATE), Plasma.
- See SM6000-series
on this site.
|
| SM6000 for USA input
voltages: 440 and 480 VAC |
- The SM6000 is now available with a special option for USA
input voltages
- SM6000 with Option P165
- Input voltage 440 and 480 VAC 3-phase
- See SM6000-series
on this site.
|
