• English
    • Nederlands
    • Deutsch
    • Français
    • Español

S280-
SERIES.

280 W Power Supplies

Unit Voltage range Current range
S 6-40

0 - 6 V

0 - 40 A

S 15-18

0 - 15 V

0 - 18 A

S 28-10

0 - 28 V

0 - 10 A

Features:

    • Output programmable from zero till max.
    • Very high reliability, designed for long life at full power
    • EMC surpasses CE requirements: low emission & high immunity
    • Protected against all overload and short circuit conditions
    • Very low output ripple and spikes

Functionalities:

    • Screwdriver adjustable or analog programmable
    • Master/Slave parallel operation with current sharing
    • Optional with external interfaces Ethernet, IEEE488, RS232 or ISO AMP
    • Eurorack (optional) or wall mounting (optional)
    • Redundant parallel operation with optional RA-10 adapter
    • Convection cooling
    • Remote sensing

Specifications:

    • Single phase input

195-265 V AC (48-62 Hz)

100-132 V AC (48-62 Hz)

    • Efficiency
up to 88% (at full load)
    • Output ripple and spikes
5 mVrms / 25 mVpp
    • Regulation
5 mV (0-100% load step)
    • Recovery time
from 100 μs (50-100% load step)
    • Programming speed
from 10 ms (10-90%)
    • Analog programming accuracy
from 0.2%
    • Stability output voltage and

   current

:

 

50.10-5 / 10.10-5

 

    • MTBF
500.000 hrs
    • Operating ambient temperature 
-20 to +50 °C

Standards:

    • Power supply standard
EN 61204-3
    • Generic Emission
EN 61000-6-3 (EN 55022B)
    • Generic Immunity
EN 61000-6-2
    • Safety
EN 60950 / EN 61010
    • Insulation input / output 
3750 Vrms
    • Protection class
IP20

 

Dimensions and weight:

Width = 195 mm

Height = 106 mm

Depth = 166 mm

Weight = 2.8 kg

Options:

  • Mounting Options S-Series

     

    Units of the S-Series are standard equipped with an H 15 mating connector with faston tabs.

    The following connectors are optional:

      • H 15 with screw connections
      • H 15 with solder pins

     

    The following mounting accessories are optional: 

      • FP 40 for Eurorack mounting
      • FPW for wall mounting

     

    By using a special adapter, redundant parallel operation is possible for the S 28-10 unit only. Accessory needed:

      • RA10 (S 28-10 only)
Downloads Document format Size
Data sheet S280-Series PDF (Acrobat Reader) 618.5 KB
Sales Department

T: +31 111 413656
F: +31 111 416919

E: sales@deltapowersupplies.com 

Contact form
Product Support

Would you like more information about our products? Please contact us.

 

Contact us