• English
    • Nederlands
    • Deutsch
    • Français
    • Español

SX-
SERIES.

75 W / 150 W DC Power Supplies

Unit Voltage range Current range
75 SX 5

3.5 - 6 V

13 A
75 SX 15-15

2x    6 - 15 V

2.5 A
150 SX 5

3.5 - 6 V

26 A
150 SX 15-15

2x    6 - 15 V

5 A
150 SX 75-75

2x    15 - 75 V

1 A
150 SX 200-200

2x    35 - 200 V

0.3 A
ST 150

3.5 - 6 V

2x    6 - 15 V

13 A

2.5 A

Features:

    • Very high reliability, designed for long life at full power
    • EMC surpasses CE requirements: low emission & high immunity
    • Protected against all overload and short circuit conditions
    • Excellent dynamic response to load changes
    • Very low output ripple and spikes

Functionalities:

    • 2 outputs: series mode, parallel mode or dual mode
    • Redundant parallel operation with external diodes
    • Remote control with an external potentiometer
    • Bench operation with bench adapter (optional)
    • Euro rack or wall mounting
    • Convection cooling

Specifications:

    • Single phase input

 

: 

 

185-264 V AC (48-62 Hz)

100-132 V AC (48-62 Hz)
    • Efficiency
 :  up to 84% (at full load)
    • Output ripple and spikes
 :  from 5 mVrms / 20 mVpp
    • Regulation
 :  from 10 mV (0-100% load step)
    • Recovery time
 :  from 100 μs (50-100% load step)
    • Stability output
 :  50.10-5 
    • MTBF
 :  1.000.000 hrs
    • Operating ambient temperature

 

:

 

-20 to +50 °C, derate current

linearly to 20% at 75°C

Standards:

    • Power supply standard
 :  EN 61204-3
    • Generic Emission
 :  EN 61000-6-3 (EN 55022B)
    • Generic Immunity
 :  EN 61000-6-2
    • Safety
 :  EN 60950 / EN 61010
    • Insulation input / output
 :  3750 Vrms
    • Enclosure
 :  IP20

 

Dimensions and weight:

Width = 36 mm

Height = 75SX: 3U / 150SX: 6U

Depth = 172 mm

Weight = 75SX: 0.6 kg / 150SX: 1.2 kg

Options:

  • Mounting options SX-Series

     

    Using a special front panel, it is possible to position the SX-units in a Eurorack. Accessories needed for Eurorack mounting:

      • F 8-3 for 75SX
      • F 8-6 for 150SX
      • F 8-6 T for ST150

     

    Using special accessories, it is possible to position the SX-units on a wall or plate. Accessories needed for wall mounting:

      • CL 15 to fix H15-connector
      • W 8-3 for vertical wall mounting 75SX
      • W 8-6 for vertical wall mounting 150SX
      • H 95 kit for flat wall mounting 75SX
      • H 155 brackets for flat wall mounting 150SX

     

    Using special accessories, it is possible to position the SX-units on a rail. Accessories needed for rail mounting:

      • CL 15 to fix H15-connector

      • AR 1 adapter for rail mounting

      • W 8-3 for rail mounting 75SX

      • W 8-6 for rail mounting 150SX

     

    By connecting a special adapter, it is possible to use the SX-units on a bench. Accessory needed for bench:

      • BA 75 for 75SX
      • BA 150 for 150SX15-15 & ST150
      • BA 150 for 150SX5, 150SX75-75 & 150SX200-200

     

    The SX-Series is standard packed with a H 15 mating connector with faston tabs (included in the price). The following connectors are optional:

      • H 15 with screw connections
      • H 15 with solder pins
Downloads Document format Size
Data sheet SX-Series PDF (Acrobat Reader) 1.4 MB
Product support

Would you like more information about our products? Please contact us.

 

Contact us
Sales department

T: +31 111 413656
F: +31 111 416919

E: sales@deltapowersupplies.com 

Contact form