Features:

• Designed for long life at full power
• Excellent dynamic response to load changes
• Protected against all overload and short circuit conditions
• EMC surpasses CE requirements: low emission & high immunity
• Low audible noise: fan is temperature controlled

Functionalities:

• Master/Slave parallel and series operation with voltage and current sharing
• Stacking is allowed, space between units is not required
• High power system configuration from multiple units
• Laboratory use (feet included), 19” rack mounting optional
• Remote sensing
• Interlock

Specifications:

Standards:

Dimensions and weight:

Width = half 19"

Height = 2 U

Depth = 406 mm

Weight = 5.4 kg

• Increased Output Power

  The conservatively rated unit allows to deliver extra output power with the same reliability. At some derating, either the maximum output voltage or output current can be increased by about 10%.

• High Speed Programming

  A 10 to 20 times higher programming speed and lower output capacitance. Excellent for laser applications, test systems or as current source with low parallel capacitance as used in plasma chambers.

• High Voltage Isolation (up to 1000 V)

  A higher output voltage allows series operation up to

  1000 V.

• 19 Inch Rack Mounting Adapters

  The mounting adapter sets are necessary to position SM800 units in a 19” rack. Several mounting options possible.

• Secured Voltage and Current Setting

  For maximum security, the CV / CC settings can be adjusted with a screwdriver only and are protected with a plastic cap from accidental adjusting.

• 2-Quadrant Output: Power Sink

  The 2-quadrant operation maintains the output voltage constant regardless the output power is positive or negative. Ideal for PWM-speed controlled DC-motors and ATE-systems.

• Digital Voltage and Current Setting

  Reliable, long life digital encoders are implemented at the front panel. Includes total front panel lock (also for CV- / CC-knobs) and a coarse or fine pitch adjustment depending on the turning speed. 

• Front Power Output

  Binding posts at the front panel instead of at the rear panel.

• Sequencer

  Arbitrary Waveform generator or stand alone automation. The sequencer is integrated in the Ethernet controller.

• Software Control and Interfaces

  Factory installed programming interfaces:

  • Ethernet (incl. sequencer)
  • PROFIBUS
  • CANBUS
  • RS232
  • IEEE448
  • ISO AMP CARD - isolated analog

   

  External programming interface modules:

  • Ethernet module
  • RS232 module
  • IEEE448 module
  • ISO AMP module