• English
    • Nederlands
    • Deutsch
    • Franšais
    • Espa˝ol

EST150
SERIES.

150 W DC Power Supplies, Triple Output

Unit Voltage range Current range
EST 150

2x    0 - 20 V

0 - 10 V

0 - 2.5 A

0 - 5 A

Features:

    • Very low output ripple and spikes
    • EMC surpasses CE requirements: low emission & high immunity
    • Excellent dynamic response to load changes
    • Protected against all overload and short circuit conditions
    • Designed for long life at full power

Functionalities:

    • 3 independent, floating outputs
    • Dual voltage tracking or series tracking mode
    • 3 output ON/OFF buttons
    • Convection cooling
    • Voltage and current control with 10-turn potentiometers

Specifications:

Input voltage (single phase) : 90-265 V AC (48-62 Hz)
Active Power Factor Correction (PFC) : 0.99 / 0.83 (at 100% load)
Efficiency : up to 81% (at full load)
Output ripple and spikes : from 0.5 mV rms / 8 mV pp
Regulation : from 5 mV (0-100% load step)
Recovery time : from 100 Ás (50-100% load step)
Tracking accuracy : 0.5%
Output voltage and current stability : 10.10-5 / 10.10-5
MTBF : 500.000 hrs
Operating ambient temperature : -20 to +50 ║C

Standards:

Power supply standard : EN 61204-3
Generic Emission : EN 61000-6-3 (EN 55022B)
Generic Immunity : EN 61000-6-2
Safety : EN 60950 / EN 61010
Insulation input / output : 3750 V rms
Protection class : IP20

 

Dimensions and weight:

Width = half 19ö

Height = 146 mm (incl. feet)

Depth = 180 mm

Weight = 3.5 kg

Firmware
Full installation -
Upgrade -
Technical documents
Data sheet DATA_SHEET_EST150.pdf
Product manual PRODUCT_MANUAL_EST150.pdf
Application notes
Application note APPLICATION_NOTE_SAFE_OPERATION_POWER_SUPPLY.pdf
Software
Software -
Product Support

 

T: +31 111 413656
E: by filling out the contact form

 

Contact form
Sales Department

 

T: +31 111 413656
E: by filling out the contact form

 

Contact form